The AD8227ARMZ is a wide supply range Instrumentation Amplifier that requires only one external resistor to set any gain between 5 and 1000. The AD8227 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground can be amplified without requiring dual supplies. The AD8227 operates on supplies ranging from ±1.5 to ±18V (2.2 to 36V single supply). The robust AD8227 inputs are designed to connect to real-world sensors. In addition to its wide operating range, the AD8227 can handle voltages beyond the rails. For example, with a ±5V supply, the part is guaranteed to withstand ±35V at the input with no damage. Minimum as well as maximum input bias currents are specified to facilitate open wire detection.

• Input voltage goes below ground
• Inputs protected beyond supplies
• Indefinite output short-circuit current
• 24nV/?Hz Input noise
• 350µA Typical supply current

Полупроводники - Микросхемы\Усилители и Компараторы\Инструментальные Усилители

Технические параметры