High Current Operational Amplifiers, Analog Devices
A wide range of high current and high power operational amplifiers from Analog Devices. These op-amps are capable of driving low impedance loads and many can be operated from higher voltage supply rails than general purpose devices. Typical applications include power FET drivers, headphone amplifiers, ultrasound and piezo drivers, ASIC input or output amplifiers, waveform generation, automated test equipment (ATE) and instrumentation.

Полупроводники - Микросхемы\Усилители и Компараторы\Операционные Усилители - ОУ

Технические параметры

Минимальная Рабочая Температура	-40 C
Максимальная Рабочая Температура	85 C
Количество Выводов	5вывод(-ов)
Полоса Пропускания	3МГц
Диапазон Напряжения Питания	2.7В до 6В
Стиль Корпуса Усилителя	sc-70
Скорость нарастания	5В/мкс
Количество Усилителей	1 Усилитель
Линейка Продукции	AD8531 Series
Offset Voltage	30mV
Number of Channels per Chip	1
Maximum Operating Temperature	+85 C
Input Offset Current	30pA
Length	2.2mm
Typical Slew Rate	5V/s
Typical Voltage Gain	88 dB
Brand	Analog Devices
Power Supply Type	Single
Package Type	SC-70
Minimum Input Voltage	2.7 V
Mounting Type	Surface Mount
Minimum Operating Temperature	-40 C
Width	1.35mm
Typical Input Voltage Noise Density	45nV/?Hz
Rail to Rail	Rail to Rail Input/Output
Height	1mm
Pin Count	5
Dimensions	2.2 x 1.35 x 1mm
Maximum Input Voltage	6 V
Typical Gain Bandwidth Product	3MHz
Amplifier Type	CMOS
Output Current	250 mA
Input Voltage Range	2.7 ? 6 V
Вес, г	0.033