The DAC102S085CIMM/NOPB is a full-featured general-purpose dual 10-bit voltage-output Digital-to-analog Converter (DAC) operates from a single 2.7 to 5.5V supply and consumes 0.6mW at 3V and 1.6mW at 5V. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40MHz over the entire supply voltage range. Competitive devices are limited to 25MHz clock rates at supply voltages in the 2.7 to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. The reference for the DAC102S085 serves both channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC102S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition and the binary input data. Both outputs can be updated simultaneously or individually depending on the setting of the two modes of operation b

• Ensured monotonicity
• Low power operation
• Rail-to-rail voltage output
• Power-ON reset to 0V
• Power down modes
• Setting time - 6µs maximum
• Zero code error - 15mV maximum
• Full-scale error -0.75%FS maximum
• Green product and no Sb/Br

Полупроводники - Микросхемы\Преобразование Сигналов и Данных\Цифро-аналоговые Преобразователи - ЦАП

Технические параметры