MKV10Z32VLF7, MCU, 32BIT, CORTEX-M0+, 75MHZ, LQFP-48
- Производитель
- NXP Semiconductor
The MKV10Z32VLF7 is a 32-bit Kinetis KV1x Motor Control and Power Conversion Microcontroller based on ARM Cortex-M0+ RISC architecture core. The core running at 75MHz with hardware square root and divide capability, it delivers a 35% increase in performance versus comparable MCUs allowing it to target BLDC as well as PMSM motors. The device incorporates 32kB internal flash, 8kB internal RAM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 40 general-purpose I/O pins. This device also features communication interfaces like two UART modules, one SPI module and one I2C module.
• Nine low-power modes to provide power optimization based on application requirements
• 4-channel DMA Controller
• SWD interface and Micro Trace buffer
• Bit manipulation engine (BME)
• External watchdog timer
• Advanced independent clocked watchdog
• Memory Mapped Divide and Square Root (MMDVSQ) module
• Multipurpose clock generator (MCG)
• 80-bit Unique identification (ID) number per chip
• Hardware CRC module
• Programmable delay block
• One 6-channel FlexTimer (FTM)
• Two 2-channel FlexTimers (FTM) with quadrature decoder functionality
• 16-bit Low-power timer (LPTMR)
• Analog comparator (CMP) containing a 6-bit DAC and programmable reference input
• General-purpose I/O
Полупроводники - Микросхемы\Микроконтроллеры - MCU\Микроконтроллеры 16 / 32 бита - MCU - ARM
Технические параметры
Максимальное Напряжение Питания | 3.6В |
Минимальное Напряжение Питания | 1.71В |
Количество Выводов | 48вывод(-ов) |
Количество Бит | 32бита |
Количество I/O | 40I/O |
Скорость ЦПУ | 75МГц |
Стиль Корпуса Микроконтроллера | LQFP |
Размер Памяти | 32КБ |
Тип Встроенного Интерфейса | i2c, spi, uart |
Размер Памяти RAM | 8КБ |
Архитектура | ARM Cortex-M0+ |
Линейка Продукции | Kinetis V Family KV1x Series Microcontrollers |
Семейство Микроконтроллера | Kinetis V |
Серия Микроконтроллера | KV1x |
Вес, г | 2.199 |
- Полное описание
- Комментарии