The O128O064DLPP3N0000 from Vishay is a yellow emitting 128 x 64 dot graphic (COG) display OLED module. (The flexible circuits (FPCs) must be soldered to PCBs. Hot-bar soldering is recommended, but requires special equipment. Alternatively, Vishay recommends hand-soldering using Pb-free wire (roll) solder or printed solderpaste with no-clean flux, and not cleaning the flux. The OLED cannot be IR reflowed. Hot-air soldering or flux/solvent contamination may damage the OLED).

• SSD1306 built-in controller
• 1/64 duty cycle
• 3V driver voltage
• Module dimension is 26.7mm x 19.26mm x 1.65mm (max)
• Viewing area of 23.938mm x 12.058mm
• Active area of 21.738mm x 10.858mm
• Dot size of 0.148mm x 0.148mm
• Dot pitch of 0.17mm x 0.17mm
• With polarized, passive matrix display

Оптоэлектроника и Дисплеи\Дисплеи / Индикаторы\Дисплеи на Органических Светодиодах

Технические параметры